Jump to content


firatpwns

Member Since 25 Mar 2008
OFFLINE Last Active Jul 03 2014 01:05 AM
***--

Posts I've Made

In Topic: Internal error occurred while playing online [Answered]

28 June 2012 - 02:43 PM

its because you don't have the maps. ( If not official ) Once you start playing, the map will be transferred to you and all the other players who don't have it. If you want to be able to see the map than you have to restart the game after the transferring. But there is no need to do that since you already know what map it is after you play it.

In Topic: For rocker219

03 December 2011 - 06:23 PM

lol Desolators Onws! :D

In Topic: Cant connect 6 player game.

16 November 2011 - 04:55 PM

One of these ?

( NAT ) Port Mapping

You can configure the router as a virtual server so that remote users accessing services such as the Web or FTP at your local site via public IP addresses can be automatically redirected to local servers configured with private IP addresses. In other words, depending on the requested service (TCP/UDP port number), the router redirects the external service request to the appropriate server (located at another internal IP address). This tool can support both port ranges, multiple ports, and combinations of the two.

For example:

Port Ranges: ex. 100-150
Multiple Ports: ex. 25,110,80
Combination: ex. 25-100,80

There is a button below all of that ''Configure''.

( FIREWALL options ) Access Control

Access Control allows users to define the traffic type permitted or not-permitted to WAN port service. This page includes IP address filtering and MAC address filtering.
Enable Filtering Function ()
Normal Filtering Table (up to 10 computers):

Here is a ''configure'' button too.


MAC Filtering Table

This section helps provide MAC Filter configuration. When enabled, only MAC addresses configured will have access to your network. All other client devices will get denied access. This security feature can support up to 32 devices and applies to clients.

MAC Address Control ()
MAC Filtering Table (up to 32 computers):

Schedule Rule

This page defines schedule rule names and activates the schedule for use in the "Access Control" page.

Schedule Rule Table (up to 10 rules):

In Topic: Cant connect 6 player game.

16 November 2011 - 04:29 PM

Is this the place where to do it ? If so than what do i type in the Trigger port,trigger type,public port and the public type ?
Remember mine is not the same as this one just the balk where u can type in.I only see NAT and FIREWALL there,the rest of the options is not shown.Instead of Advanced there is DATA. its like START-VOICE-DATA-EXTRAS.

Special Applications

Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications cannot work when Network Address Translation (NAT) is enabled. If you need to run applications that require multiple connections, specify the port normally associated with an application in the "Trigger Port" field, select the protocol type as TCP or UDP, then enter the public ports associated with the trigger port to open them for inbound traffic.
Note: The range of the Trigger Ports is from 1 to 65535.

Posted Image

In Topic: Cant connect 6 player game.

16 November 2011 - 01:32 AM

Ok I ve found this.

http://support.netgear.com/app/answers/detail/a_id/1118


It says that i need to go to advanced than security.But there is no advanced.It says some routers use the WAN Setup options page instead.than It says Enter the servers IP address.
When I go to WAN there is no balk to type my IP in.

In the Start I see some informations...
Below that there is a link Disconnect
And Right below that there is DHCP Client Log and Security Log.
( Client Log : View information on LAN DHCP clients recorded on the router )
( Security Log : View any attempts that have been made to gain access to your network )
The Second menu button is Voice Settings...

The third one is DATA.
When I go there I see NAT and FIREWALL at the left side.

But it says :
Advanced Setup

''The router supports advanced functions like Stateful Packet Inspection, hacker attack detection, content filtering, access control, virtual servers and client filtering.

We recommend that you keep the default settings.''


When I click on NAT,It shows options that are Port Mapping,Special Application,Nat mapping table.

When I click on FIREWALL, it shows these options : Access Control,Mac Filter,URL Blocking,Schedule Rule.

Where do I type the Ip of the server ?


I don't know if this changes anything but I thought it might be good to mention it.I am using AVG Internet Security 2012.It has its own Firewall I guess...I've already tried to turn Firewall off from AVG.Repaired The First Decade and than Reinstalled again...The results are Same.